How to Clean and Store Adult Toys Safely

Clean a new product before using it, and read the leaflet that comes with it. Some powered products have specific instructions for charging and for keeping water away from the motor or charging port.

Use a mild, fragrance-free cleanser with warm water, then rinse thoroughly. TPE and other porous materials need extra attention: clean immediately after use and make sure the material is completely dry before storage.

Do not boil, microwave, or use harsh solvents unless the product leaflet explicitly states it is safe. If you are unsure, use a dedicated toy cleaner and follow its directions.

Metal and hard plastic surfaces are easy to wash with mild soap and warm water or to wipe clean. Dry fully. On powered products, wipe the housing with a damp cloth only and keep water away from controls, seams, and charging points.

Charge according to the product instructions. Allow the product to dry completely before charging. USB charging ports should be kept clean and dry, and cables should be stored separately so they do not pull on the port.

Air-dry on a clean, lint-free surface before putting anything away. Store products separately, ideally in a pouch or container, away from direct heat and sunlight. Do not store soft materials pressed against each other for long periods.

Water-based lubricant is compatible with silicone, TPE, and soft materials. Silicone-based lubricant can affect silicone and soft surfaces, so check the product guidance first. Clean lubricant residue after use so it does not attract dust.

Porous materials such as TPE hold onto residue over time. Replace them periodically, or sooner if the surface becomes tacky, discoloured, or difficult to clean. Silicone, metal, and hard plastics generally last considerably longer with good care.